Do you want to make your own solar Panels?

Then get your hands on Home Made Energy

Home Made Energy is a diy solar panels plan that is perfect for beginners.

The problem with Solar Panels is that they’re expensive, around $12,000 for a standard house.

Home Made Energy is set of plans that will show you how to make your own solar panels for only $195. You need absolutely no technical skills and you can build your own solar panels in just one weekend!

You can get your hands on the Home Made Energy plans by clicking the following link: >> Click here to make your own solar panels <<

Having your solar panels is the best way to save money on energy bills!

Save on Your Electric Bill With DIY Solar Panels

When you want to achieve a significant energy savings on your electric bill, you can hire someone to install solar panels to the roof of your house or you can make your own DIY solar panels. Making your own solar panels also allows you to protect the environment, because your household is not using finite energy resources. The items you need are commonly available in your house. Buy the items you don’t have at home. The construction process requires you to know what kind of photovoltaic cells to buy. Plan ahead so you know how many cells to buy – you’ll need to know how many solar panels you are going to make.

Before you get started on your DIY solar panels project, understand the types of photovoltaic cells you will need. Decide ahead of time whether you need copper indium selenide cells or crystalline silicon cells.

Items Needed

ø Photovoltaic cells
ø Glass or plastic cover
ø Soldering iron
ø Fine rosen-core solder
ø Rosen pen
ø Picture frames
ø Silicone glue
ø Red and black insulated wire
ø Blocking diodes, one per panel
ø Polarized two-pin Jones plug
ø Multimeter

Step 1
Lay the glass or plastic cover on the ground. Look at each photovoltaic cell and place them on the glass or plastic so the side with lines faces toward the sun.

Step 2
Decide if you want to increase the voltage coming from each cell or if you want to increase the current for your DIY solar panels. Depending on your household’s needs, placing all cells on the same wire increases the voltage the cells receive. Placing each cell on different wires increases the current.

Step 3
Connect the negative side of each photovoltaic cell to the positive end of the next cell. After you have positioned every cell correctly, solder the cells together with fine rosen-core solder, using a bit of the tabs on each cell. Using the rosen pen, solder all photovoltaic cells together. The solar panels are delicate, so use a soft touch as you solder. They should be arranged in a negative-positive pattern, which enables current to flow through.

Step 4
Lay out each picture frame. Squeeze silicone glue around the perimeter of each frame. Carefully lower the solar cells into the frames so the backs are facing down and the lines are facing up. Begin removing the plastic or glass sheet, ensuring that no glue lands onto the lined side of each cell.

Step 5
Solder each negative and positive tab separately. As you work on this step, the negative tabs will be on the lined side of each cell. The positive tabs should be on the unlined side.

Step 6
Solder a black insulated wire to all negative tabs on your DIY solar cells. Repeat this process, using a red insulated wire, soldering that wire to all positive tabs.

Step 7
Place the glass or plastic cover on top of the solar cells of your DIY solar cells to provide protection from wind, rain or debris. At this point, you should have two insulated wires protruding out of the solar panels.

Step 8
Install a blocking diode on each DIY solar panel. These diodes block the panel from discharging the batteries when the weather is cloudy or at night.

Step 9
Add the polarized two-pin Jones plug to the black and red insulated wires.

Step 10
Check how much voltage and current are passing through your DIY solar panels using the multimeter.

After you have made your DIY solar panels, you need to set them up so they get full sunlight during the day. Your new solar panels will still work on cloudy days, although they will not operate at the same level of power as when the sun is not hidden behind clouds.

As you use your DIY solar panels to produce electric power for your home, you can eventually save about 50 percent of what you would normally spend on your electric bill. Because the amount of energy from the sun is so high, it far outpaces the energy potential from natural gas, coal or oil. Using solar energy reduces your family’s carbon footprint since your home is not using any pollution-causing energy sources, such as coal.

The use of solar power is one rise today. More and more people are trying to save on their traditional electric bills, while enjoying an environmentally-friendly form of energy. If you are also interested in adding this renewable source of power to your house, you will need a few details to help you know how to go about it.

A Professional Quote

You can call up a professional and have him give you a quote on how much it will cost to install a system. The quote might surprise you, because it will be around $40,000 or more for a full system for providing solar energy. This kind of money might not be in your budget.

If you have this kind of money, by all means invest it in a professional install if you are not used to working with your hands. However, if you want the joy of solar without the bring price tag, then turn to DIY solar panels and do the installation yourself.

Installing Your Own Solar Power System

You can use DIY solar panels to construct your own system and save many thousands of dollars in the process. Some of these come in kits with all the parts you will need, while others you buy the plans and build yourself. Also, you can buy premade solar panels and just save on the installation costs. Any of these choices will save you compared to having a professional install the system.

How Many Panels?

You can start with just one solar panel if that is all you can afford at the time. It will run you $100 to $300 or something in that neighborhood depending on whether you build from plans, build from a kit or buy a premade one. Then as you get more funds you can add panels to expand your system.

However, if you need to figure how many panels you need for a large system, you have to do the math. For this, you will need to know:

• what your present energy usage is
• how much you want the solar to start producing

Once know these things, you can see how much power the solar panels are supposed to produce. Divide the amount of energy you need by how much energy the panels will produce, this will bring you to the panels you will need in your system.

It also depends on the size of house you have to install the system, as too how many panels you can use. For a roof mount, you can only use as many panels as you have room for in physical space. With a ground mount, you do have a bit of flexibility if it is a wide open space.

Installation

A grid needs to be laid out on the roof for the panels to be mounted. Some of these grids can be equipped with trackers to move the panels back and forth with the sun. Whichever one you choose is up to you. The tracking ones will capture sunlight more accurately during day.

Once the mounts are installed the panels must be attached and linked together with copper wire. An inverter is needed to convert the DC power produced in to AC power that the house can use. Any access can be stored in batteries for later use.

By switching to solar today, you can start saving anywhere from 10% on up on your electric bill depending on your system. Isn’t that worth looking into for you? Also, check out state and federal grants and tax credits that could help you pay for your new solar system.